Quote Cancellation (Cancel All Quotes)

The purpose of this test is to verify that the client system can cancel all resting quotes and receive and process a Quote Cancel Acknowledgment, including an instrument/instrument group with no resting quotes.

Pre-Registered or On-Demand Format

Note: This test is used for both Pre-Registered and On-Demand formats. The image below shows the Pre-Registered format version of the test.

 

Note: If a test is not proceeding to the next step, selecting the Refresh button ( ) below the test steps may resolve the issue.

  1. To run a Quote Cancellation (Cancel All Quotes) test:
  1. Select a SenderComp from the drop-down and select ASSIGN if a SenderComp is not already assigned.
  2. Click the "START TEST" button.

Note: DO NOT select the "START TEST" button once the test process is in progress.

  1. Over an iLink connection, submit a two-sided Mass Quote with at least 2 quotes from the same instrument group.
  2. Select Yes or No to indicate whether your system received and processed the Mass Quote Acknowledgment.
  3. Submit a Quote Cancel All message.
  4. Select Yes or No to indicate whether your system received and processed the Quote Cancel Acknowledgment.