Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 109 Current »

This table lists the text reasons that can be sent in tag 58-Text of the Session Level Reject message when an iLink message from a client system does not pass CME Globex session-level validation. 

Session Layer Validation

Tag 58-Text

All Messages (header)

Tag 8-BeginString

  • BeginString (8) tag is not present
  • BeginString (8) tag has an incorrect value, should be FIX4.2

Tag 9-BodyLength

  • BodyLength (9) tag is not present
  • BodyLength (9) tag has an incorrect value: should be ( )

Tag 35-MsgType

  • Could not extract message type.
  • UNKNOWN Message received. Message Type = ( )

Tag 34-MsgSeqNum

In session logon message must have 34=1. Logout forced.

Tag 49-SenderCompID

  • "SenderCompId (49) tag is not present"
  • "Invalid SenderCompID (49) tag. Logout forced."FTI
    Received invalid fault tolerance indicator = ( ) Logout forced.
    if LOGGED_OFF and if Msg Type is Logon (A)  and FTI is  (not U or N) or Null then
  • Invalid logon.  Logout forced.
  • Received initial logon message with Primary Indication = ( ) + Expected U or NThis message comes from backup:
  • Received invalid fault tolerance indicator = ( ). Expected Bif logged off and MsgType is non logon msg then:
    Non logon message received while not logged on.

Tag 50-SenderSubID

  • SenderSubId (50) tag is not present
  • Business Reject: Other '50 (SENDER_SUB_ID) length: 1 min: 2'
  • tag SenderSubID (50) can contain only alphanumeric values

Tag 52-SendingTime

  • SendingTime (52) tag is not present
  • SendingTime (52) tag is not formatted properly ( )

Tag 56-TargetCompID

  • TargetCompId (56) tag is not present
  • TargetCompId (56) tag has an incorrect value: ( ) should be CME

Tag 57-TargetSubID

  • TargetSubId (57) tag is not present
  • TargetSubId (57) tag has an incorrect value: ( ), should be G

Tag 142-SenderLocationID

SenderLocationId (142) tag is not present

All Messages (trailer)

10-CheckSumInvalid FIX message. Checksum tag not found.
Logon (tag 35-MsgType=A)

If tag 43-PossDupFlag=Y (resend), then check:
tag 122-OrigSendingTime

  • Cannot have an Original Sending Time field on an initial logon. Logout forced.
  • In-session logon may not include OrigSendingTime field. Logout forced.

Tag 96-RawData

Invalid logon.  Logout forced.

Tag 141-ResetSeqNumFlag

  • Cannot have Reset Sequence Number Flag=Y during initial logon. Logout forced.
  • In session logon message must have 141=Y. Logout forced.

Tag 108-HeartBtInt

  • Error during logon. Heartbeat tag invalid.
  • Error during logon. Heartbeat value invalid. Received: ( ), expected value in range 5-999


All messages EXCEPT: Cross Request (tag 35-MsgType=s), Quote Request(tag 35-MsgType=R)

Tag 11-ClOrdID

  • ClOrdID (11) tag is not present
  • Last 8 characters of tag ClOrdID (11) cannot contain spaces only
Order Cancel Request (tag 35-MsgType 35=F)
Cancel/Replace Request (tag 35-MsgType=G)

Tag 37-OrderID

OrderID (37) must be present on a Cancel or Cancel Replace Request.

New Order (tag 35-MsgType=D),
Cancel/Replace Request (tag 35-MsgType=G)

tag 38-OrderQuantity
  • OrderQty (38) must be present on a New Order or Cancel/Replace Request.
  • For Globex Credit Controls (GC2): Credit Limit Violation: Order Quantity x exceeds Clip Size: y.


  • Position Limit Violation for Account: <Account>, Position Increase: <position> makes position above the BUY Position Limit: <Limit> by amount: <Amount>. Limit set by CMF for Product Code: <Product Code>

  • Position Limit Violation for Account: <Account>, Position Increase: <position> makes position above the BUY Position Limit: <Limit> by amount: <Amount>. Limit set by EF for Product Code: <Product Code>

  • Pre-Trade Registration Violation: Account: <Account> is not Registered for this Executing Firm

  • Pre-Trade Registration Violation: Account: <Account> is not Registered to Trade Product Code: <Product Code>

  • Pre-Trade Registration Violation: Account: <Account> is not Registered to Trade UDS Covereds

  • Pre-Trade Registration Violation: Account: <Account> has been Suspended from Trading by the CMF for this Executing Firm

tag 1031-CustOrderHandlingInst
  • Required Field Missing 'Missing field: 'CustOrderHandlingInst (1031)'
  • Invalid FIX Field: 1031=<null>
  • tag CustOrderHandlingInst (1031) contains invalid value:  <>
  • Invalid FIX Field: 1031=<null>
Order Status Request (tag 35-MsgType=H)


  • Exceeded maximum number of unacknowledged OSR requests.
  • Order Status Not Found.
  • CltOrdId (11) tag is not present.
Resend Request (tag 35-MsgType=2)

Tag 7-BeginSeqNo & Tag 16

  • Invalid BeginSeqNum. Integer required. /Invalid EndSeqNum. Integer required.)
  • Error. Received new Resend Request while already processing a Resend Request.
  • Invalid BeginSeqNum or EndSeqNum. Cannot be greater than last seq num sent.
  • Invalid BeginSeqNum. Cannot be less than 1.
  • Invalid EndSeqNum. Cannot be less than 0.
  • Range of messages to resend is greater than maximum allowed ( )
  • "BeginSeqNo is greater than EndSeqNo."
Mass Quote (tag 35-MsgType=i)

tag 1031-CustOrderHandlingInstInvalid FIX Field: 1031=<null>
Messaging Control Violations

Volume Controls initiated Reject due to exceeding Mass Quote Message limit. Current TPS: ####

Volume Controls initiated Reject. Current TPS:####
  • No labels