Page tree
Skip to end of metadata
Go to start of metadata

The Execution Report - Order Creation, Cancel or Modify (tag 35-MsgType=8, tag 39-OrdStatus=0, 4 or 5) message is sent in response to:

Tag

Name

Enumeration

Req

Description

Standard Header - CME Globex to Client System




35MsgTypeString(2)8=Execution ReportYHeader tag identifying message type.

1

Account

String(12)


Y*

Unique account identifier.

Note: This tag value is always uppercase, regardless of the case in the inbound message tag. Client systems are not required to submit capitalized account values to CME Globex.

6

AvgPx

Price(20)

0

Y

Always '0'.

11

ClOrdId

String(20)


Y*

Unique order identifier assigned by client system.

Client system must maintain uniqueness of this value for the life of the order.

Refer to iLink - CME Globex Identifiers for more information.

14

CumQty

Int(9)


Y

Contains cumulated traded quantity throughout lifespan of an order.

This value resets to zero if order is cancelled.

For Execution Report - Modify message sent in response to Order Cancel/Replace Request:

  • Value resets to zero if client system submits cancel/replace with disabled in-flight mitigation (IFM).
  • Value does not reset if client system submits cancel/replace with enabled IFM.

17

ExecID

String(40)


Y

CME Globex assigned execution report message identifier; unique per market segment per trading session.

20

ExecTransType

Char(1)

0=New

Y

Identifies transaction type as 'new' (i.e., new order, order cancel or cancel/replace accepted).

37

OrderID

String(17)


Y

CME Globex assigned order identifier; unique across all iLink sessions and market segments.

38

OrderQty

Int(9)


Y*

Order quantity submitted by client.
The format of this field is different from FIX protocol specifications.
This field must be an integer.

39

OrdStatus

Char(1)

0=New Order Ack
4=Cancel Ack
5=Modify Ack

Y

Identifies order status as accepted, cancelled or replaced.

40

OrdType

Char(1)

1=Market order (with protection)
2=Limit order
3=Stop order (with protection)
4=Stop-Limit order K=Market-Limit order

Y*

Order type.

The state of an order type can change over the life of an order. For example, a submitted stop order (3) can turn into a market order (1) when the stop price level has been crossed.

Also refer to Order Types for Futures and Options in Electronic Trading Concepts.

41

OrigClOrdID

String(20)


N

Last accepted ClOrdID in the order chain. Unvalidated value returned as submitted by client system on Order Cancel Request or Order Cancel-Replace Request message. If a value is include in tag 41-OrigClOrdID, the same value is returned; however, if no value is sent, a value of '0' is returned in  all Execution Report (tag 35-MsgType=8)  messages, except the Execution Report-Order Status Request.

Refer to iLink - CME Globex Identifiers for more information.

44

Price

Price(20)


N

Required for limit or stop-limit orders. Designates the price per single contract unit. The decimal, and if applicable the negative sign of the price are each one character. Client systems should not supply more than 9 characters to the left and 9 characters to the right of the decimal.

See Fractional Pricing for products that tick fractionally but must be submitted in decimal.

48

SecurityID

String(12)


Y*

Identifier of the instrument defined in tag 107-SecurityDesc.

54

Side

Char(1)

1=Buy

2=Sell

Y

Side of order.

55

Symbol

String (6)


Y

This tag contains the Group Code of the instrument.

59

TimeInForce

Char(1)

0=Day
1=Good Till Cancel (GTC)
3=Fill and Kill
6=Good Till Date

N

Specifies how long the order remains in effect. If not present, DAY order is the default.

For GTD, ExpireDate is required.
For FAK, MinQty can also be specified.

See Order Types for Futures and Options and Order Management  for more information.

60

TransactTime

UTCTimestamp(21)


Y*

UTC format YYYYMMDD-HH:MM:SS.sss
e.g. 20091216-19:21:41.109

78

NoAllocs

NumInGroup(1)


N

Returned on Execution Report if sent on inbound message.

79

AllocAccount

String(11)


N

Returned on Execution Report if sent on inbound message.

Note: This tag value is always uppercase, regardless of the case in the inbound message tag. Client systems are not required to submit capitalized account values to CME Globex.

107

SecurityDesc

String(20)


Y*

Instrument identifier.
Future Example:  GEZ8
Option Example:  GEZ9 C9375

99

StopPx

Price(20)


N

Designates stop trigger price specified by the individual entering the order or cancel/replace.

110

MinQty

Int(9)


N

Minimum quantity of an order to be executed. This tag is used only when tag 59-TimeInForce=3 (Fill and Kill). 

The value of MinQty must be between 1 and the value in tag 38-OrderQty.

The format of this tag is different from FIX protocol specifications.
This tag must be an integer.

150

ExecType

Char(1)

0=New Order Ack
4=Cancel Ack
5=Modify Ack

Y

Indicates type of execution report.

151

LeavesQty

int(9)


Y

Amount of contract units open for further execution.

The format of this tag is different from FIX protocol specifications.
This tag must be an integer.

167

SecurityType

String(6)

FUT=Future

OPT=Option

IRS=Interest Rate Swap

FXSPOT=FX Spot

N

Indicates instrument is future or option.

Note: For options strategy including UDS COMBO or COVERED, send OPT. For UDS Futures, send FUT.

378

ExecRestatementReason

Int(3)

8=Exchange (GCC)
100=Cancel on Disconnect
103=Cancel Oldest (Resting) due to Self Match Prevention
104=Cancel from CME Globex Credit Controls (GC2) violation
105=Cancel from FirmSoft
106=Cancel from Risk Management API (RMI)
107=Cancel Newest (Aggressing) due to Self Match Prevention

108=Cancel due to resting order quantity less than minimum lot size

N

Identifies origin of the order elimination.

This tag will not be sent on cancellations triggered by an iLink Order Cancel Request.

210

MaxShow

Int(9)


N

See Order Display Quantity in Electronic Trading Concepts.

Maximum quantity of an order to be shown in the order book at any given time.

  • The value of MaxShow must be a fixed number N between 1 and value in tag 38-OrderQty.
  • If MaxShow is reduced (due to matches) to 0, then MaxShow is reset to the lesser of N or the number in tag 38-OrderQty remaining.

432

ExpireDate

LocalMktDate(8)


Y

Populated as follows according to the Order Qualifier value set in tag 59-TimeInForce:

  • For GTD contains expiration date
  • For GTC contains all zeros
  • For Day contains date of current session
  • For FAK contains date of current session

CME Globex does not support tag 126-ExpireTime. Only the expiration date can be set.Orders expire at the end of the trading session for the specified date.

1028

ManualOrderIndicator

Boolean(1)

Y=manual
N=automated

Y*

Value sent on inbound message from client system indicating the order as sent manually or generated by automated trading logic.
For an Order Cancel - Execution Report, this tag will contain the resting value attached with the order regardless of how the cancel itself was submitted.

1031

CustOrderHandlingInst

String(1)

W - Desk

Y - Electronic (Default)

C - Vendor-provided Platform billed by Executing Broker

G - Sponsored Access via Exchange API or FIX provided by Executing Broker

H - Premium Algorithmic Trading Provider billed by Executing Broker

D - Other, including Other-provided Screen

Y

Defines source of original order.

1731AvgPxGroupIDString(20)
N

Used to identify account numbers or orders for grouping trades together for average price calculations.

If incoming value is greater than max length, iLink will return the right-most twenty bytes.
1598ClearingTradePriceTypeString(1)0 – Trade Clearing at Execution Price
1 – Trade Clearing at Alternate Clearing Price
NIndicates whether spread differential trade is clearing at execution price (tag 31-LastPx) or alternate clearing price (i.e. previous day’s settlement price).
819AvgPXIndicatorString(3)0 – No Average Pricing (Default)
1 – Trade is part of an Average Price Group Identified by the AvgPxGroupID
3 - Notional Value Average Pricing with Average Price Group Identified by the AvgPxGroupID
N

Indicates if the resulting trade is to be average priced.

This tag is also used to indicate type of average price grouping.

5149MemoString(75)
N

Allows users to submit a free-form Note tag with a customer order and persists from order entry through clearing

Note: if tag 5149-Memo value on inbound messages exceeds the max length of 75 bytes, iLink will return a truncated 75 bytes from the right on the response.

7928SelfMatchPreventionIDString(12)
N

Use of this tag indicates client does not wish to trade against itself on CME Globex.

Non-implied orders with the same Self-Match Prevention identifier submitted with the same Executing Firm Identifier (sub-component of tag 49-SenderCompID) will not match on CME Globex.

8000

SelfMatchPreventionInstruction

Char(1)

O=Cancel Resting
N=Cancel Aggressing

N

Indicates a cancel instruction when Self Match Prevention is triggered.

Note:

  • To use tag 8000-SelfMatchPreventionInstruction, client systems must include tag 7928-SelfMatchPreventionID on the originating message
  • If tag 8000-SelfMatchPreventionInstruction is not sent, the resting order will be cancelled.
  • Tag 8000-SelfMatchPreventionInstruction is NOT sent in the Execution Report response to a New Order Cross (tag 35-MsgType=s) message.

9717

CorrelationClOrdID

String(20)


N

Unvalidated value returned as submitted if sent by client system on inbound message. See tag 9717-CorrelationClOrdID note in the New Order message specification for further details.

Note: for solicited order cancellation by client system, CME Globex returns the value of tag 9717-CorrelationClOrdID on the Order Cancel Execution Report  as submitted on the Order Cancel Request.

Note: for order cancellation by FirmSoft, CME Globex always returns the values of tag 9717-CorrelationClOrdID on the Order Cancel Execution Report  from the value of tag 11-ClOrdID on the original Execution Report (tag35-msgType=8, tag 39-OrdStatus=0) New Order Acknowledgment message.

548

CrossID

String(32)


N

Sent on Execution Report to allow correlation of execution responses to the New Order Cross.

549

CrossType

Int(1)

3=RFC order

N

The CME Globex platform uses this tag to validate instrument eligibility.
This value is also returned on the Execution Report for New Cross Orders only.

961

HostCrossID

String(32)


N

Unique ID generated at the Cross level.
Returned on the Execution Report for New Cross Orders only.

5979RequestTimeInt(20)
NInformation carried on a response to convey the time (UTC) when the request was received by the MSGW application. UTC Timestamps are sent in number of nanoseconds since Unix epoch synced to a master clock to microsecond accuracy.

Standard Message Trailer





End of message.

Y: Required by FIX protocol, Y*: Required by CME Globex (not by FIX protocol), N: Not Required, C: Conditionally

See Session Layer Validation Conditions for error messages for Tag 58-Text.