Page tree
Skip to end of metadata
Go to start of metadata
EnumerationDescription
DeliveryPointPhysical delivery point
DeliveryMethodMethod of delivery of the commodity.
EmissionsYearYear for emissions trading.
GradeGrade of the commodity to be delivered.
QualityVariationAdjustmentWhen value is "Y" Quality Variation Adjustment is applicable.
SpecialConditionFree-form description of condition.
TransferTermsTerms for physical transfer
AshThe ash content of a coal product.
AshFusionTemperatureThe temperature at which the ash form of a coal product fuses completely in accordance with the ASTM International D1857 Standard Test Methodology.
BTUperLBThe number of British Thermal Units per Pound of a coal product.
BTUQualityAdjustmentThe Quality Adjustment formula to be used where the Actual Shipment BTU/Lb value differs from the Standard BTU/Lb value.
FinesPassingScreenCoal fines (% by weight) passing 1/4 inch screen.
FluidThe temperature at which the ash cone flattens.
GrindabilityThe Hardgrove Grindability Index value of a coal to be delivered.
InitialDeformationThe temperature at which an ash cone shows evidence of deformation.
MoistureThe moisture content of a coal product.
SCoTASpecificationWhen value is "Y", the type and source of coal refer to global SCoTA specifications.
SO2The sulphur dioxide content of a coal product.
SO2QualityAdjustmentThe Quality Adjustment formula to be used where the Actual Shipment SO2/MMBTU value differs from the Standard SO2/MMBTU value.
SofteningHeightHalfWidthThe temperature at which the height of an ash cone equals half its width. (Hemisphere temperature).
SofteningHeightWidthThe temperature at which the height of an ash cone equals its width. (Softening temperature).
SulphurThe sulphur content of a coal product.
TopSizeThe smallest sieve opening that will result in less than 5% of a sample of a coal product remaining.
VolatileThe volatile content of a coal product.
DeliveryQualityDelivery quality of electricity, whether "firm" or "not firm".  Value field takes one of the following values: 0 = Not firm; 1 = Firm
LoadShapeForcedWhen value is "Y" it indicates that the electrical load settlement shape is forced.
VoltageThe voltage of the electricity to be delivered.
CalorificValueThe calorific value of the gas to be delivered specified in megajoules per cubic meter.
GasQualityThe quality of the gas to be delivered.
ApplicableLawFor U.S. Emissions Allowance Transactions this is used to specify the applicable emissions law when this is not defined in Emissions Product Definitions.
ComplianceStartYearFor E.U. Emissions Allowance Transactions this describes the specified compliance period start year for which the allowances are issued.
ComplianceEndYearFor E.U. Emissions Allowance Transactions this describes the specified compliance period end year for which the allowances are issued.
EEPApplicableWhen the value is "Y", Excess Emission Penalty is specified to be applicable in the confirmation then the Excess Emission Penalty will be determined in the manner specified in the confirmation.
EEPEquivalentApplicableWhen value is "Y", the EEP Equivalent is applicable. See Part [7] definition of EEP Equivalent.
EEPPenaltyApplicableWhen value is "Y", the Excess Emissions Penalty. is applicable. See Part [7] definition of Excess Emissions Penalty.
EEPRiskStartDateThe start date used to determine how provisions in Part [7] Page 7 (B) Failure to Deliver Not Remedied are to be applied.
EEPRiskEndDateThe end date used to determine how provisions in Part [7] Page 7 (B) Failure to Deliver Not Remedied are to be applied.
FailureToDeliverApplicableFor EU Emissions Allowance Transactions this holds the failure to deliver (alternative method) election. Used to determine how provisions in Part [7] Page 7 (B) Failure to Deliver Not Remedied are to be applied.
SchemeAbandonmentFor U.S. Emissions Allowance Transactions specifies terms which apply in the event of an abandonment of scheme event.
TrackingSystemFor U.S. Emissions Allowance Transactions this is used to specify the tracking system when this is not defined in Emissions Product Definitions.
BrandCountryCountry where brand is produced.
BrandManagerBrand name manager.
BrandNameBrand name of the metal.
BrandProducerProducer of brand.
ShapePhysical shape(s) of the metal.
AdjustmentFallbackWhen value is "Y" it indicates that adjustment to the fallback weather station is appropriate.
AlternateProviderWhen value is "Y" it indicates that an alternate data provider is acceptable.
FinalEditedDataWhen value is "Y" it indicates that provider?s data is final.
SynopticFallbackWhen value is "Y" it indicates that synoptic data fallback is acceptable.
  • No labels