You are here: AutoCert+ MexDer iLink > Risk Control Gateway

/*]]>*/

Risk Control Gateway

The Risk Control Gateway test verifies that your system can handle the unique messaging behavior for a daily violation scenario. For example, when sending multiple orders, the order with quantities exceeding the daily quantity threshold will be acknowledged and then canceled.

  1. To run a Risk Control Gateway test:
  1. From the Contract drop-down, select the desired contract if the contract is not already locked. 
  2. Click START TEST.

Note: DO NOT select the START TEST button once the test process is in progress.

  1. Submit a Limit Day order [tag 35-MsgType=D (New Order), tag 40-OrdType=2 (Limit order), tag 59-TimeInForce=0 (Day)] for one of the instruments with a quantity of 500.
  2. Select Yes or No to indicate whether or not your system processed the Execution Report - Confirmation/Acknowledgment (35=8, 39-OrdStatus=0 (New Order Ack)] message.
  3. Submit a Limit Day order [35=D, 40=2, 59=0] for one of the instruments with a quantity of 2501.
  4. Enter the tag 103-OrdRejReason value to verify that your system received and processed the Execution Report - Reject [35=8, 39=8 (Rejected)] message.

  1. Submit an Order Cancel Request (tag 35-MsgType=F) message for the order placed in Step 1.
  2. Select Yes or No to indicate whether or not your system processed the Execution Report - Cancel [35=8, 39=4 (Cancel Ack), tag 150-ExecType=4 (Cancel Ack)] message.
  3. Submit a Limit Day order [35=D, 40=2, 59=0] for the selected instrument with a quantity of 2501.
  4. Select Yes or No to indicate whether or not your system processed the Execution Report - Confirmation/Acknowledgment message.