|Production - M/M change||-0.2%||-0.6% to 0.3%||-0.6%||-0.2%||-0.4%|
|Capacity Utilization Rate - Level||77.4%||77.0% to 77.6%||77.0%||77.5%|
|Manufacturing - M/M||0.1%||-0.3% to 0.3%||0.0%||0.4%||0.3%|
November was another weak month for the industrial economy, in part reflecting unusually warm temperatures that are driving down utility output. Industrial production came in at the Econoday low forecast, down a very sharp 0.6 percent in November. This is the biggest drop in 3-1/2 years. Utility output fell a monthly 4.3 percent after falling 2.8 percent in October. Mining, reflecting low commodity prices and contraction in energy extraction, has also been week, down 1.1 percent for a third straight decline.
This brings us to the most important component, manufacturing where October's 0.3 percent bounce higher (revised downward from 0.4 percent) now unfortunately looks like an outlier. Manufacturing production came in unchanged in November reflecting weakness in motor vehicles, down 1.0 percent in the month, and also a dip back for construction supplies which fell 0.2 percent after a weather-related surge of 2.3 percent in October. One positive is a slight snapback for business equipment which, after declines in the two prior months, rose 0.2 percent.
All the weakness is pulling down capacity utilization, to 77.0 percent in November for a heavy 5 tenths dip. Utilization is running more than 3 percentage points below its long-term average. Mining utilization is now under 80 percent, down 1.1 points in the month to 79.4 percent. Utility utilization fell 3.4 points in the month to 74.5 percent with manufacturing utilization down 1 tenth to 76.2 percent. Excess capacity, though not cited as a major factor behind the lack of inflation in the economy, does hold down the cost of goods.
Year-on-year rates confirm the weakness, down 1.2 percent overall with utilities down 7.6 percent and mining down 8.2 percent. Manufacturing is in the plus column but not by much at plus 0.9 percent.
Weather factors are skewing utility output but otherwise, readings are fundamentally soft and reflect the downturn in global demand made more severe for U.S. producers by strength in the dollar.
(Note that the traditional non-NAICS numbers for industrial production may differ marginally from the NAICS basis figures.)
Market Consensus Before Announcement
Down 0.2 percent, industrial production was weak in October but not the manufacturing component where production, boosted by strong demand for construction supplies, rose a solid 0.4 percent to end two prior months of decline and offering rare good news for a sector that has been hurt by weak exports. The warm weather here in the U.S. is behind the strength in construction supplies and also behind a big dip in utility output which is what pulled down the October headline. And more of the same is expected for November with the Econoday consensus at minus 0.2 percent for the headline but up 0.1 percent for manufacturing.
The Federal Reserve's monthly index of industrial production and the related capacity indexes and capacity utilization rates cover manufacturing, mining, and electric and gas utilities. The industrial sector, together with construction, accounts for the bulk of the variation in national output over the course of the business cycle. The production index measures real output and is expressed as a percentage of real output in a base year, currently 2007. The capacity index, which is an estimate of sustainable potential output, is also expressed as a percentage of actual output in 2007. The rate of capacity utilization equals the seasonally adjusted output index expressed as a percentage of the related capacity index.
The index of industrial production is available nationally by market and industry groupings. The major groupings are comprised of final products (such as consumer goods, business equipment and construction supplies), intermediate products and materials. The industry groupings are manufacturing (further subdivided into durable and nondurable goods), mining and utilities. The capacity utilization rate -- reflecting the resource utilization of the nation's output facilities -- is available for the same market and industry groupings.
Industrial production was also revised to NAICS (North American Industry Classification System) in the early 2000s. Unlike other economic series that lost much historical data prior to 1992, the Federal Reserve Board was able to reconstruction historical data that go back more than 30 years.
Investors want to keep their finger on the pulse of the economy because it usually dictates how various types of investments will perform. The stock market likes to see healthy economic growth because that translates to higher corporate profits. The bond market prefers more subdued growth that won't lead to inflationary pressures. By tracking economic data such as industrial production, investors will know what the economic backdrop is for these markets and their portfolios.
The index of industrial production shows how much factories, mines and utilities are producing. The manufacturing sector accounts for less than 20 percent of the economy, but most of its cyclical variation. Consequently, this report has a big influence on market behavior. In any given month, one can see whether capital goods or consumer goods are growing more rapidly. Are manufacturers still producing construction supplies and other materials? This detailed report shows which sectors of the economy are growing and which are not.
The capacity utilization rate provides an estimate of how much factory capacity is in use. If the utilization rate gets too high (above 85 percent), it can lead to inflationary bottlenecks in production. The Federal Reserve watches this report closely and sets interest rate policy on the basis of whether production constraints are threatening to cause inflationary pressures. As such, the bond market can be highly sensitive to changes in the capacity utilization rate. In this global environment, though, global capacity constraints may matter as much as domestic capacity constraints.
Industrial production and capacity utilization indicate not only trends in the manufacturing sector, but also whether resource utilization is strained enough to forebode inflation. Also, industrial production is an important measure of current output for the economy and helps to define turning points in the business cycle (start of recession and start of recovery).
The bond market will rally with slower production and a lower utilization rate. Bond prices will fall when production is robust and the capacity utilization rate suggests supply bottlenecks. Healthy production growth is bullish for the stock market only if it isn't accompanied by indications of inflationary pressures.
The production of services may have gained prominence in the United States, but the production of manufactured goods remains a key to the economic business cycle. A nation's strength is judged by its ability to produce domestically those goods demanded by its residents as well as by importers. Many services are necessities of daily life and would be purchased whether economic conditions were weak or strong. Consumer durable goods and capital equipment are more likely purchased when the economy is robust. Production of manufactured goods causes volatility in the economy. When demand for manufactured goods decreases, it leads to less production with corresponding declines in employment and income.
The three most significant sectors include motor vehicles and parts, aircraft and information technology. Volatility in any these single sectors could affect the total.
Industrial production is subject to some monthly variation. As with all economic statistics, the three-month moving average of the monthly changes or year over year percent changes provide a clearer picture of the trend in this series.